|
Davit set includes ... Standard rail mounts,
deck bases, 4:1 Harken® 40mm purchases with 3/8" line
| Bay II davit set.......... |
$ 2120.00 |
| Island davit set.......... |
$ 2585.00 |
| Winch upgrade (available in singles) |
996.00 each |
| Lengthen the lower end of the davits (Island Davits) |
340.00/pair |
Upper mount options:
| Standard Mount - 1-1/2"(35mm) or 5/8"(16mm) stand-off |
0.00 / pair |
| Custom Mount: Clamp 328.00 Caprail 588.00 Transom-tubular 452.00 |
/ pair |
Base options:
| Deck base - 2½" (63mm) round or 1-1/2" x 3" (38mm) rectangular or triangle (with offset pin) |
0.00 / pair |
| Mini - Extended or mini offset toerail base |
62.00 / pair |
| Extended toerail base (standard design) 240.00, (Custom design.) 367.00 |
/ pair |
| Transom base - custom bent ('L' type) |
156.00 / pair |
| Transom base - custom welded angle ( inverted 'L' type) |
238.00 / pair |
| Extended transom base - custom welded angle with up to 5" extension |
440.00 / pair |
Lifting tackle options:
| Credit for no tackle |
-432.00 / pair |
| 6:1 purchase upgrade with 40mm Harken Carbo blocks |
142.00 / each |
| Harken Carbo 57mm blocks upgrade |
4:1 cost 88.00 each, 6:1 cost 172.00 |
Davit stabilizing systems:
| Stainless Steel 'Fixed' stabilizer (often used with Solar panel risers - below) |
710.00 |
| Stainless Steel 'Slip-On' stabilizer (allows davits to rotate) |
730.00 |
| Single 1" (25mm) S/S cross tube for
wire or rope stabilizing (up to 65" span) |
260.00 |
| Single 1¼ '(32mm) S/S cross tube for
wire or rope stabilizing (over 65" span) |
355.00 |
Rail Reinforcing Systems:
| Heavy End Plates with welded loop |
110.00 / pair |
| Rail support straps - S/S bar type |
470.00 / set |
| Tubular ail supports - 1" tube (1-1/8" or 1-1/4" tube - add 50.00 /set) |
605.00 / set |
Accessories:
| Davit cam cleat assembly |
150.00 / pair |
| Flag Socket for SS100 or Slip-On - 3/4" ID or 1" ID or 1-1/4" ID |
146.00 each |
| Secure-It stainless steel ratchets (with 12' of Dacron webbing) |
182.00 / set |
| Solar panel risers for SS100 stabilizer |
565.00 / pair |
| Solar panel risers for Slip-On stabilizer |
480.00 / pair, diagonal braces 265.00 |
| 1" x 14ga T316 tubing for (Slip-On type) solar panel mounting |
24.60 / foot |
| 1" x 2" anodized rectangular tube (for building panel framing) |
21.10 / foot |
| Stern light mounting plate |
149.00(SS100 model), 172.00(Slip-On) |
Shipping (via UPS
- Ground within USA, excluding Hawaii and Alaska): Davits $260.00 and Stabilizers
$96.00 (82" or less)
Prices effective as of November 2,2024.
Subject to change without notice. |
