Riser for Radar, KVH antenna, or
similar:
Removable unit for low travel-lift operations
Pole constructed of Stainless-steel tube
Hole for internally led wiring with messenger
Antenna mounting plate to suit |
|
|
$885.00 |
| |
Wind Generator Pole, includes:
Removable unit for low travel-lift operations
Pole constructed of 2-1/2” x 14ga T316 s/s tube
Hole for internally led wiring with messenger
Sleeved anodized aluminum pipe top section to suit wind generator |
|
|
$830.00 |
| |
Blank Plate for future riser, includes:
Welded mounting plate with reinforcing bar
Cover plate with fasteners
Hole for internally led wiring with messenger |
|
|
|
$330.00 |
| |
Integrate existing stern rails into arch (available only on certain model
Island Packet models) |
$935.00 |
| |
Removable davit extension arms - necessary only on certain models
contact us for more information |
$1100.00 |
| |
| Solar panel mounting system (2 sets per panel) |
$495.00/panel |
| |
|
| Fixed 1" x 14ga. T316 bimini bow attached to the front of the arch |
$1090.00 |
| |
|
| Dinghy Lifting options: |
|
| 4:1 Tackle (Harken 40mm blocks), 3/8” low-stretch Dacron |
$275.00/per side |
| 6:1 Tackle (Harken 40mm blocks), 3/8” low-stretch Dacron |
$428.00/per side |
| 4:1 Tackle (Harken 57mm blocks), 3/8” low-stretch Dacron |
$347.00/per side |
| 6:1 Tackle (Harken 57mm blocks), 3/8” low-stretch Dacron |
$469.00/per side |
| |
| Welded clutch plates (2) and loops (4) for guide blocks, with |
|
| rope clutches (2) and guide blocks (4) - both sides (choose tackles above) |
$885.00 |
| |
| Outboard lifting arm with mount facing either inside the arch or outside the
arch |
$884.00 |
| Dual facing mount - inside AND outside of the arch |
$360.00 extra |
| Additional single mount (without lifting arm) |
$645.00 extra |
| |
|
| 3:1 lifting tackle (Harken blocks, 3/8” low-stretch Dacron) |
$228.00 |
| 4:1 lifting tackle (Harken blocks, 3/8” low-stretch Dacron) |
$275.00 |
| |
| Antenna riser, 1” x 3" high - welded to arch (with messenger) |
$160.00 each |
| |
| Flood light (LED), mounting bracket and wiring |
$370.00 |
| |
| Stern light mounting bracket with messenger |
$197.00 |
| |
| Flag Socket (3/4”, 1” or 1¼” ID) |
$160.00 |
| |
| Additional 3/8” lifting eyes for dinghy hoisting |
$78.00 each |
| |
| Additional 1/4" welded loops |
$52.00 each |
| |
| Additional cleats |
$102.00 each |
| |
| Special (enclosed) center section - see miscellaneous photos |
$1245.00 |
| |
| Outboard mounting frame - see miscellaneous photos |
$940.00 |
| |
| If necessary, packaging for Road Freight would cost $1125.00. The arch would be shipped freight collect. |
